This is not my work . I get from http://lgviet.com/. I only share . All credit to source below.
How to make rooted system for all firmware (H818P)
Instruction base on 10e
1. Download
- SRKToolG4_1-00.zip
- Inject_Root_G4.zip
- Need Ubuntu
2.Unzip SRKToolG4_1-00.zip
3. Run srktool-g4-1-00.exe
4.Make sure drivers are installed. Check Windows Device Manager. Make sure proper USB Debugging mode is enabled.
5. Plug G4 into Comuter
6. Choose 2 > 1 (Enter to Download Mode.) Your G2 will be entering to Download mode
7. Now your G4 Enter Download mode. In SRKTool Choose 0. Back to Main Feature
8. Choose 000. Command DOS Prompt.
9. Now you Enter Command Prompt
SRKToolG4_1-00>
10. Type "ports.bat" (No Quote) then Press <ENTER> Remember Port number at
\Device\LGANDNETDIAG1
11. Type "cd command" (No Quote) then Press <ENTER>
12. Type "Send_Command.exe \\.\COM4" (No Quote) then Press <ENTER>
Please use correct ports from 10.
13. You will see # Prompt the type "id" (No Quote) in front of # you will see message as below.If it not show anything please Type "ENTER"
(No Quote) and use Send_Command again.
14. Using command below for dump system.img
15.After dump finished . type "ENTER" (No Quote) Press <ENTER> -- > type "exit" (No Quote) Press <ENTER>
16. You are going to exit from Download Mode from menu choose 2 > 2. Leave Downloadmode.
17. After boot to system copy system.img to your computer
18. This Step you must have Ubuntu . Copy
- system.img copy to Ubuntu
- Unzip Inject_Root_G4.zip then copy folder Inject_Root_G4 to Ubuntu
19. Copy system.img to Inject_Root_G4 folder
20. Open terminal
21. Use Command "sudo -i" (No Quote) Press <ENTER>
Then enter password for root permission
22. Changing path to Inject_Root_G4 folder
23. Use Command "chmod + x autoroot.sh" (No Quote) Press <ENTER>
24. Use Command "sudo ./autoroot.sh" (No Quote) Press <ENTER>
After finished system.img will be changing to new name rootedsystem.img
25. Get rootedsystem.img to computer then copy to your G4
26. Repeat Step 3 - Step 13.
27. Using command below for dd rootedsystem.img
28. Afrer finished Please type "LEAVE" (No Quote) Press <ENTER>
Your G4 will be Rooted :)
29. Enjoy
Source :
http://lgviet.com/forum/threads/guild-g4-dump-inject-root-system-img-to-low-effort-root-all-variant.45523/#post-1284605"]http://lgviet.com/forum/threads/guild-g4-dump-inject-root-system-img-to-low-effort-root-all-variant.45523/#post-1284605
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765"]http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
How to make rooted system for all firmware (H818P)
Instruction base on 10e
1. Download
- SRKToolG4_1-00.zip
- Inject_Root_G4.zip
- Need Ubuntu
2.Unzip SRKToolG4_1-00.zip
3. Run srktool-g4-1-00.exe
4.Make sure drivers are installed. Check Windows Device Manager. Make sure proper USB Debugging mode is enabled.
5. Plug G4 into Comuter
6. Choose 2 > 1 (Enter to Download Mode.) Your G2 will be entering to Download mode
7. Now your G4 Enter Download mode. In SRKTool Choose 0. Back to Main Feature
8. Choose 000. Command DOS Prompt.
9. Now you Enter Command Prompt
SRKToolG4_1-00>
10. Type "ports.bat" (No Quote) then Press <ENTER> Remember Port number at
\Device\LGANDNETDIAG1
D:\06 Android\SRKTool\SRKToolG4_1-00>reg query HKLM\hardware\devicemap\SERIALCOMM
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGANDNETMDM0 REG_SZ COM3
\Device\LGANDNETDIAG1 REG_SZ COM4
D:\06 Android\SRKTool\SRKToolG4_1-00>pause
Press any key to continue . . .
11. Type "cd command" (No Quote) then Press <ENTER>
12. Type "Send_Command.exe \\.\COM4" (No Quote) then Press <ENTER>
Please use correct ports from 10.
13. You will see # Prompt the type "id" (No Quote) in front of # you will see message as below.If it not show anything please Type "ENTER"
(No Quote) and use Send_Command again.
#id
uid=0(root) gid=0(root) context=u:r:recovery:s0
#
14. Using command below for dump system.img
dd if=/dev/block/mmcblk0 bs=8192 skip=55296 count=529920 of=/data/media/0/system.img
15.After dump finished . type "ENTER" (No Quote) Press <ENTER> -- > type "exit" (No Quote) Press <ENTER>
16. You are going to exit from Download Mode from menu choose 2 > 2. Leave Downloadmode.
17. After boot to system copy system.img to your computer
18. This Step you must have Ubuntu . Copy
- system.img copy to Ubuntu
- Unzip Inject_Root_G4.zip then copy folder Inject_Root_G4 to Ubuntu
19. Copy system.img to Inject_Root_G4 folder
20. Open terminal
21. Use Command "sudo -i" (No Quote) Press <ENTER>
Then enter password for root permission
22. Changing path to Inject_Root_G4 folder
23. Use Command "chmod + x autoroot.sh" (No Quote) Press <ENTER>
24. Use Command "sudo ./autoroot.sh" (No Quote) Press <ENTER>
After finished system.img will be changing to new name rootedsystem.img
25. Get rootedsystem.img to computer then copy to your G4
26. Repeat Step 3 - Step 13.
27. Using command below for dd rootedsystem.img
dd if=/data/media/0/rootedsystem.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0
28. Afrer finished Please type "LEAVE" (No Quote) Press <ENTER>
Your G4 will be Rooted :)
29. Enjoy
Source :
http://lgviet.com/forum/threads/guild-g4-dump-inject-root-system-img-to-low-effort-root-all-variant.45523/#post-1284605"]http://lgviet.com/forum/threads/guild-g4-dump-inject-root-system-img-to-low-effort-root-all-variant.45523/#post-1284605
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765"]http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
